This is a wood based filament that can be used in most desktop 3D printers, such as our Geeetech I3 pro B. The wood filament prints easily and smoothly, similar to PLA, and give off a smell of wood when printing. The printed objects look very much like a wood carving work, which will appear rough and similar to MDF, Medium Density Fiberboard but it can be easily sanded.
Because 3D wood filament has real wood fibers, the print temperature can be adjusted during the print to produce differing shades of color. If the print temperature is adjusted by as little as 10 degrees mid-print, the resulting color will have a « grainy » look. Printing at lower temperatures will produce a brighter color; versus a print at higher temps will create a darker print. Possible extrusion temperature is better to be with a good starting point at 190°C. Hotter temperatures will extrude a darker filament; using variable temperatures during a print.
And it’s better for us to use wood filament with short-range extruder instead of long-range one ,because wood filament contains wood fiber that it’s easier to produce resistance then block nozzle.Short-range extruder has bigger thrust to push filament into hot end that the chance of clogging the nozzle will be smaller.
Layer height: 0.25 mm
Default extrusion with: 60~ 80 mm
Speed for non-moves: 40~60 mm
Temperature of extruder: 190°C~230°C
Net weight: 1 kg
filament sizes: 1.75
Print Temperature: 190 – 230°C
1. Brand: Geeetech;
2. Weight: 1.75mm PLA 1KG Spool, approximately 2.20lbs;
3. Material: Wood-PLA Composite – Color: Wood
Compatible with most 3D printers;