Menu Fermer

SUNLU 3D Printer Filament PLA+, 1.75mm PLA plus Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02…

☞【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free SUNLU 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75 mm PLA Plus filament gives off a sweet smell, and it is considered by many as an improvement over hot PLA Plastic.
☞【High Precision +/- 0.02mm Tolerance】 Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 330 m of filament on each spool ease of use, minimal warping, no odor,no clogging, no bubbles. Increase your printing objects delicacy.
☞【Consistent 1.75mm Diameter High Compatibility PLA Plus Filament】Compatible with all FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP

SUNLU 3D filament is developed for everyday use, perfect when you need a high quality filament in standard colors. When Quality Counts! You should choose SUNLU 1 kg of high quality 3D Printer material for your 1.75 mm 3D-Printer.

Why Choose SUNLU 3D Filament

1.  No time restriction and you can leave your printer alone

The quality of 3d filament can affect the stability of the 3d printer nozzle when you initiate a printing job that last for long duration where you are performing a 10 hours printing, you have to keep an eye on it in order to avoid any stuck or jam of the nozzle. Nevertheless, when you make use of SUNLU quality 3d filament, there will be no time restriction and you can leave your printer alone.

2. High compatibility

Consistent 1.75mm Diameter Sunlu filaments have been tested on various brands of 3d printer in the market and have recovered positive customer feedback.

 

3. Specifications:

Weight&Length: 1000g (2.2 lbs)& 330M

Printing temperature: 190~230℃

Material: Polylactic Acid

Diameter& Tolerance : 1.75MM &± 0.02MM 

Print Speed : 50-100mm/s 

Base Plate Temperature : No Heat Required / 40-50°C 

Certificates: REACH &RoHS

Tips:

1. Prior to Printing: Build plate of your 3D printer needs to be level, clean and oil-free.

2. Operating Environment: Store PLA filament in a dry and cool place because it can absorb moisture from air. We recommend keeping 3d filament vacuum sealed until you are ready to use it because long term exposure to humidity can compromise filament quality and performance. Best storage temp.: 5-30℃, Humidity: 45%-75%; 

3. Not for children under 3 years old.

☞【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free SUNLU 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75 mm PLA Plus filament gives off a sweet smell, and it is considered by many as an improvement over hot PLA Plastic.
☞【High Precision +/- 0.02mm Tolerance】 Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 330 m of filament on each spool ease of use, minimal warping, no odor,no clogging, no bubbles. Increase your printing objects delicacy.
☞【Consistent 1.75mm Diameter High Compatibility PLA Plus Filament】Compatible with all FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP
☞【Vacuum Sealed Package】Every spool of Sunlu 3d filament is carefully vacuum packaged with desiccant to maintain low level of moisture content. And keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
☞【Vibrant Colors】Each color in Sunlu PLA plus filament series was carefully selected to produce eye-catching results. 

Défiler vers le haut